PRODUCTION OF A COLD ROOM PROTOTYPE POWERED BY A HYBRID SOLAR PHOTOVOLTAIC SYSTEM-GENERATOR SET FOR THE POREDAKA HEALTH CENTER IN MAMOU, GUINEA

Abstract

This present research consists in realizing a model of cold room for the conservation of pharmaceutical products in the health center of Porédaka in Mamou in the Republic of Guinea. During this realization, we used the components necessary for its installation, then we chose the experimental model and then, proceed to the cutting and assembly. The prototype produced works with three temperature ranges which are defined as follows: from the point of operation for the conservation of pharmaceutical products, there are cold rooms whose conservation in ambient temperature between 15 ° C and 25 ° C, those of refrigeration whose temperature ranges vary from 2 ° C to 8 ° and finally those whose operating temperature varies between -20 ° C and -80 ° C (freezing). Considering all these temperature ranges that our prototype supports, we can say that three cold rooms have been made in one.